The EAGLE 12 CNC Turing Machine features a sliding gang type tool post providing fast tool changing time and is maintenance free. It has an optional adjustable cartridge tooling system (available on request) which can be used with different kinds of tool sets for various batch sizes and work pieces to meet different production requirements.    to Larger Picture   Next paragraph.

HEADSTOCK:

• Spindle speed is 30-3000rpm (optional 45-45000, 60-6000rpm) with variable speed power transmission, suitable for high speed and precision machining processes.
Wide band belts are used on headstock and spindle motor pulley to avoid noise and heat deformation during long periods of operation.
• The spindle sleeves of the front and rear bearings are of an integrated design, giving ultimate rigidity and accuracy.
• The chip bucket and coolant tank are located underneath the center of the machine to provide easy chip and coolant removal.   Next.

ITEM	SPECIFICATIONS:  EAGLE-12		Units: mm(inch)
WORK CAPACITY	Swing Over bed		ø 330 (13)
	Swing Over side		Slide gang typeø136(5.4)	Turret ø135(5.3)
	Max. maching diameter x length		Slide gang type(STD) ø 135 x 150 (ø 5.3 x 5.9)	Turret (OPT) ø 128x 130 (ø 5.0 x 5.1)
MACHINE BODY	Slant angle of bed		45o
	Max. travel range		X-Axis	Z-Axis
			Cross 230 (9.1)	Longitudinal 230 (9.1)
	Servo motor ¡@		X-FANUC 1KW/3000rpm	Z-FANUC 1KW/3000rpm
	Rapid traverse speed of each axis		30M/min(1181.1)	30M/min(1181.1)
SPINDLE	Diameter of spindle front bearing bore		ø 80 ( 3.2)
	Diameter of spindle through bore/bar		ø45/  ø35 ( 1.8 /  1.4)
	Spindle nose		ASA A2- 5
	Taper of spindle bore		1/20
	Spindle drive motor		5.5/7.5kw(FANUC) 3.7/5.5kw(MITSUBISHI)
	Spindle Speed		(STD)3000RPM(10")/(OPT)4500/6000RPM(12")
	Diameter of chuck		(STD)6"manual chuck / (OPT)6" hydraulic chuck
TOOLS TURRET	Type		Sliding gang type	Tools turret
	No.of tool capacity		6pcs	8pcs
	External & internal tool post		o 16 x 16 (0.62 x 0.62)	o 16 x 16 (0.62 x 0.62)
	Boring bar post		2 pcs	4 pcs
	Radil tool post		1 pcs	2 pcs
	Axial tool post		2 pcs	4 pcs
	Dual tool post		1 pcs
DRIVE MOTOR	Coolant motor		1/8 HP
	Hydraulic system motor		1   HP
	Chip conveyor motor		1/4 HP
GENERAL SPECIFICATIONS	Height from floor to spindle center		900 (35.4)
	Height from bed to spindle center		255(10)
	Floor area (L x W x H)		1990 x 1194 x 1538 (78.3 x 47 x 60.5)
	Net weight (kg)        Approx.		1720
	Gross weight(kg)    Approx.		2170

All text and graphics at this web site are Copyright © 2000 Tools and Machinery Ltd.. All rights reserved. All other products and company names listed herein, are trademarks or registered trademarks of their respective owners.